Exhaust Air Heat Pump Nibe F370

NIBE F370 is an exhaust air heat pump with built-in DC fan and water heater that is equipped with corrosion protection of copper. In addition, there is a built-in immersion heater. Energy is recovered from the ventilation air and supplied to the heat pump, which thus significantly reduces energy costs. The unit ventilates the house, delivers heat and prepares hot water. NIBE F370 is intended for low-temperature dimensioned radiator circuit and / or underfloor heating.

NIBE F370 can be docked to other heat sources such as district heating.

SERVICE

• Great emphasis has been placed on the design of the control panel to create the simplest possible operation. A minimum of care is required. Only control of safety valves and cleaning of air filter and fan need to be done. The air filter is housed in a filter cartridge and is very easy to clean.
• All essential details are accessible from the front. This facilitates service and care.

EQUIPMENT

• NIBE F370 is equipped with complete valve equipment consisting of drain, filling, vacuum, non-return and safety valve for the water heater part. The boiler part is equipped with a drain, filling and safety valve. In addition, the unit is equipped with climate-controlled automatic heating with outdoor, room and supply temperature sensors, circulation pump, power monitor and expansion vessel.

NOTE! The F370E with article number 6244553 now includes the valve coupling set, which is necessary for the enamelled version.

CONSTRUCTION

• The F370 is controlled by a microprocessor. This provides easy operation while the heat pump is always used as efficiently as possible, as the microprocessor continuously decides on the best operating mode. The microprocessor also handles automatic heating and circulation pump. It is possible to control another shunt automation when there is a need for two different flow temperatures. The display shows in clear text current temperatures and set values.
• The design of the ventilation part provides a high ventilation capacity. The fan, which can be switched steplessly, can also be easily forced or reduced via an internal clock, control panel or external signal.
• F370 provides high savings due to a powerful compressor that with intelligent control works with the currently most favorable temperature ratio.
• The insulation consists of molded neopor (environmentally friendly foam) for minimal heat loss.
• The outer casing consists of white powder-coated sheet steel. The front cover is easily removable for best accessibility during installation and possible service.
• F370 has a maximum immersion heater power of 10.25 kW. The power is easily adjustable via the display and can be power blocked according to requirements in the building regulations.

When purchasing and installing Nibe's products in Sweden, you will be covered by their warranty. The warranty applies only in Sweden.