LK Shunt Cabinet VS2 Prefab 2-12 Circuits White

Description

LK Shunt Cabinet VS2 Prefab is delivered as a complete unit with mounted LK Distributor Shunt VS2 and LK Heating Circuit Distributor RF including couplings for connecting underfloor heating pipes dim 16. Note! The cabinet is intended for right-hand mounting, i.e. connection to the shunt group is made from the right side of the cabinet, via the cabinet bottom. The cabinet has a tight bottom with rubber pipe penetrations. The cabinet bottom is equipped with a drain socket, which means that any leakage water is drained to an inspectable location. The cabinet is made of 1 mm powder-coated steel sheet, RAL 9016. The cabinet is intended to be mounted either built-in to the wall or externally on the wall. The minimum stud thickness for installation is 95 mm.

There are different frame/door solutions for the cabinet depending on where the cabinet is mounted and the aesthetic requirements. The standard frame/door is made of powder-coated steel sheet, RAL 9016. There are two types of standard frame/door depending on whether the cabinet is mounted inside or outside on an interior wall. When mounted outside, the cabinet should also be supplemented with a base to hide pipes between the cabinet and the floor. When mounted in rooms with a waterproofing layer on the wall, the cabinet should be supplemented with LK Wet Zone Door PRESEAL, which is connected to the wall's waterproofing layer.

For a discreet / hidden installation of LK cabinets, it is advantageous to use LK Gypsum Door HIDDEN. For more information about each frame/door, see the product range. The cabinet is supplied with pipe penetrations, bellows sleeve for drainage, 1.5 meter empty pipe for drainage, drainage bend with outlet plate, cable penetrations for room control, spray protection and assembly instructions. The back of the cabinet is equipped with four pre-assembled M8 nuts that can be used for fastening to LK Cabinet Frame when you want to assemble the cabinet before a concrete slab is cast.

Specifications

• Pressure/Flow/Temp: 6bar
• Design: Designed for right-hand mounting
• Color: White, RAL 9016
• Surface treatment: Powder coating
• Material: Steel/brass
• Material housing/enclosure/frame: Steel
• Surface protection housing/enclosure/frame: Painted
• Color housing/enclosure/frame: White
• RAL number housing/enclosure/frame: 9016
• With frame for door: No
• With door: No
• With waterproof bottom: Yes
• With pipe penetration seal: Yes
• With splash guard: Yes
• With brackets for distributor: Yes
• With outlet for leakage indication: Yes
• Suitable for built-in/recessed mounting: Yes
• Suitable for surface mounting: Yes
• Open holes top: No
• Number of holes top: 10
• Open holes side: No
• Number of holes per side: 2
• Open holes bottom: Yes
• Number of holes bottom: 26
• With pre-assembled distributor: Yes
• Height: 710 mm
• Depth: 95 mm

 Manufacturer                       Width                  Number of Circuits

  Part Number

2435379                                    800 mm                               2

2435380                                    800 mm                               3

2435381                                    800 mm                               4

2435382                                    800 mm                               5

2435383                                    800 mm                               6

2435384                                    800 mm                               7

2435385                                   1050 mm                              8

2435386                                   1050 mm                              9

2435387                                   1050 mm                             10

2435388                                   1050 mm                             11

2435389                                   1050 mm                             12