Swim & Fun Spa Heater 3kW

Description

Recommended for use as a frost guard and supplementary heat source in smaller pools under 1,000 liters and spas (wilderness bath, Hot Tub). The heater has a built-in "flow-switch" contact, which stops the water heater if the water flow is suddenly interrupted. Can be used both indoors and outdoors. Outdoors, the heater must be placed dry and covered. Remember to insulate with thermocover when using outdoors.

In a pool of 1,000 litres, the water is heated approx. 1.0 degrees per hour, provided that the pool is covered with thermocover. (Measured at an ambient temperature of between +2 and -5 degrees). The water heater is equipped with a simple adjustable thermostat of 0 - 45 C and Flow Switch. The Flow Switch ensures that the water heater automatically switches off when the circulation from the pump stops. 50 mm glued sleeve on inlet and outlet. Heating power: 3000 W. 16 Amp. 230V/50-60HZ. The heater must be installed by a professional installer who is authorized to perform hydrotherapeutic bath installations.

Note:

• This electric heater is a professional unit, which is supplied without a plug on the cord. It is recommended that the installation be done by an authorized electrician.
• The water heater has a built-in sensor and can only work when the pump is running and the water circulates through the heater at more than 3600 litres/hour.

Specifications

• Effect: 3 kW
• Voltage: AC 220-240 V, 50/60 Hz
• Amps: 16A
• Max pressure: MPa; 0.035
• Classification: IP45
• Heating of 1000 L: +1.0 ºC per hour
• The spa heater can under optimal conditions heat the spa water to 45 °C.