Wilo DrainLift, SANI-L.17T/4, Pump Station

Description

Compact, ready-to-connect and fully submersible twin-pump pumping station for pumping sewage with feces. Gas and watertight collection container with sloping floor at an angle and a service opening with transparent cover. Freely selectable inlets within the marked areas. Level measurement performed with an analog output signal 4-20 mA.

Product data

• Gross container volume V: 137 l
• Effective volume at 180 mm inlet height V: 65 l
• Effective volume at 250 mm inlet height V: 90 l
• Effective volume at 315 mm inlet height V: 105 l
• Level: 70 dB
• Operating mode (not submerged): S1
• Diagonal dimensions: 965 mm
• Free passage for the hydraulics: 65 mm

Engine data

• Mains connection: 3~400 V, 50 Hz
• Voltage tolerance: ±10%
• Motor rated power P2: 2.5 kW
• Rated speed n: 2848 1/min
• Rated current IN: 5.5 A
• Insulation class: F
• Protection class motor: IP68
• Payment Type: Direct Online (DOL)
• Max. breaking frequency t: 60 1/h
• Operating mode per pump: S1
• Motor guard: Bimetal

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross section: 6G1 mm²
• Mains plug: CEE 32A, 3P+N+PE, 6h

Material

• Material container: PE
• Pump housing: PP-GF30
• Impeller: Stainless steel
• Shaft: Stainless steel
• Material seal: NBR
• Material motor: Stainless steel

Installation dimensions

• Pipe connection on the suction side: DN 100
• Pipe connection on the pressure side: DN 80
• Vent connection: Ø 75

Permitted area of use

• Media temperature T: 3 °C
• Max. medium temperature, short-term operation up to 3 min T: 65 °C
• Ambient temperature T: 3 °C
• Maximum operating pressure PN: 4 bar
• Max. permissible pressure in the pressure line P: 1.5 bar

Measure

• Length L: 852 mm
• Height H: 705 mm
• Width W: 635 mm