Wilo DrainLift, SANI-M.16T/4C, Pump Station

Description

Ready-to-connect and fully submersible single-pump pumping station for pumping aggressive media. Gas and watertight collection container with sloping floor at an angle and a service opening with a transparent cover. Freely selectable inlets within the marked areas. Level measurement performed with an analog output signal 4 ... 20 mA. Pressure connection fitted with a non-return valve including a service opening. Self-cooling motor (cooling jacket) with thermal motor monitoring.

Pre-installed automatic control cabinet for automatic operation: Operation via display and icon-based, alphanumeric menu, Total alarm with potential-free contact, Single fault message with potential-free contact, ModBus interface, Integrated and mains-independent alarm, Adjustable delay time, 1.5 m connection cable with mounted plug

Hydraulic Data

• Maximum operating pressure PN : 4 bar
• My. medium temperature Tmin : 3 °C
• Max. medium temperature Tmax : 40 °C
• Ambient temperature min. Tmin : 3 °C
• Max. ambient temperature Tmax : 40 °C
• Max. medium temperature, short-term operation up to 3 min T : 65 °C
• level : 70 dB
• Connection volume V: 50 l
• Effective volume at 180 mm inlet height V : 50 l
• Effective volume at 250 mm inlet height V : 63 l
• Effective volume at 315 mm inlet height V: 74 l
• Cutting tools: none

Engine Data

• Mains connection : 3~400 V, 50 Hz
• Rated current IN : 3.6 A
• Protection class : IP68
• Phase : 3
• Rated speed n : 2850 1/min
• Number of poles: 2
• Grant Type : Direct Online (DOL)
• Max. breaking frequency t : 60 1/h
• Supplied power P1(Q=max.) for the selected impeller * number of pumps P1 : 2100 W
• Operating mode per pump : S1
• Insulation class: F

Material

• Pump housing : PP-GF30
• Impeller : PP-GF30
• Shaft: stainless steel
• Material motor: stainless steel

Installation Dimensions

• Pipe connection on the pressure side: DN 80

Measure

• Length: 700 mm
• Height: 575 mm
• Width : 600 mm