Wilo DrainLift, SANI-XL.12T/4C, Pump Station

Description

Ready-to-connect and fully submersible twin pump pump station for pumping aggressive media. Gas and watertight collection container with sloping floor at an angle and a service opening with transparent cover. Freely selectable inlets within the marked areas. Level measurement performed with an analog output signal 4-20 mA.

Product data

• Gross container volume V: 358 l
• Effective volume at 250 mm inlet height V: 148 l
• Effective volume at 315 mm inlet height V: 182 l
• Effective volume at 560 mm inlet height V: 286 l
• Level: 70 dB
• Operating mode (not submerged): S1
• Diagonal dimensions: 1230 mm
• Free passage for the hydraulics: 44 mm

Engine data

• Mains connection: 3~400 V, 50 Hz
• Voltage tolerance: ±10%
• Motor rated power P2: 1.1 kW
• Rated speed n: 2893 1/min
• Rated current IN: 2.9 A
• Insulation class: F
• Protection class motor: IP68
• Payment Type: Direct Online (DOL)
• Max. breaking frequency t: 60 1/h
• Motor guard: Bimetal

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross section: 6G1 mm²
• Mains plug: CEE 32A, 3P+N+PE, 6h

Material

• Material container: PE
• Pump housing: PP-GF30
• Impeller: PP-GF30
• Shaft: Stainless steel
• Material seal: NBR
• Material motor: Stainless steel

Installation dimensions

• Pipe connection on the suction side: DN 150
• Pipe connection on the pressure side: DN 80
• Vent connection: Ø 75

Permitted area of use

• Media temperature T: 3 °C
• Max. medium temperature, short-term operation up to 3 min T: 65 °C
• Ambient temperature T: 3 °C
• Maximum operating pressure PN: 3 bar
• Max. permissible pressure in the pressure line P: 1.5 bar

Measure

• Length L: 1025 mm
• Height H: 837 mm
• Width W: 877 mm