Wilo EMU KS, 15DS, Drainage Pump

Description

Fully submersible wastewater pump for vertical wet installation, for pumping polluted and sandy water. Hydraulic housing and impeller in cast iron, engine housing in aluminum. Pressure connection with vertical pressure output and Storz coupling. Self-cooling motor in three-phase design and detachable connection cable with level switch and CEE plug. The seal is made on the medium and motor side with a mechanical seal. The unit can be used in sorrel without restrictions.

Specifications

• Color: Green
• Material: cast iron/multi-material

Hydraulic Data

• Maximum operating pressure PN: 2 bar
• Type of impeller construction: Open multi-channel impeller
• Free passage for the hydraulics: 10 mm
• Max. immersion depth: 12.5 m
• My. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 40 °C
• Ambient temperature min. Tmin: -15 °C
• Max. ambient temperature Tmax: 40 °C

Engine Data

• Mains connection: 3-400 V, 50 Hz
• Voltage tolerance: ±10%
• Capacity factor: 0.86
• Motor rated power P2: 1.3 kW
• Power consumption P1 max: 1900 W
• Rated current IN: 3.15 A
• Starting current I: 16 A
• Rated speed n: 2850 1/min
• Max. breaking frequency t: 15 1/h
• Insulation class: F
• Protection class: IP68

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross-section: 4G1.5 mm²
• Mains plug: CEE M16W (3P+N+PE, 6h)
• Type of connection cable: Detachable

Installation Dimensions

• Pipe connection on the pressure side: Storz C