Wilo EMU KS, 9D, Drainage Pump

Description

Fully submersible waste water pump for vertical wet installation, for pumping contaminated and sandy water. Hydraulic housing and pump wheel in cast iron, engine housing in aluminium. Pressure connection with vertical pressure outlet and Storz coupling. Self-cooling motor in three-phase version and detachable connection cable with CEE plug. The seal is made on the medium and motor side with a mechanical seal. The unit can be used in sörpling without restrictions.

Specifications

• Color: Green
• Material: cast iron/multi-material

Hydraulic Data

• Maximum operating pressure PN: 2 bar
• Type of impeller construction: multi-channel impeller
• Free passage for the hydraulics: 5 mm
• Max. immersion depth: 12.5 m
• Mine. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 40 °C
• Ambient temperature min. Tmin: -15 °C
• Max. ambient temperature Tmax: 40 °C

Engine Data

• Mains connection: 3-400 V, 50 Hz
• Voltage tolerance: ±10%
• Capacity factor: 0.85
• Rated motor power P2: 0.75 kW
• Power consumption P1 max: 1100 W
• Märkström IN: 1.9 A
• Starting current I: 9 A
• Rated speed n: 2850 1/min
• Max. switching frequency t: 15 1/h
• Insulation class: F
• Protection class: IP68

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross-section: 4G1.5 mm²
• Mains plug: CEE M16W (3P+N+PE, 6h)
• Type of connection cable: Detachable

Installation Dimension

• Pipe connection on the pressure side: Storz C

Dimensions

• Length: 163mm
• Height: 387mm
• Width: 230mm