Wilo EMU KS 12E GG, Drainage Pump

Description

Drainage pump in robust construction, primarily intended for mobile installation. Pumping of contaminated drainage water, e.g. construction pits, flooded areas, etc. Fully submersible waste water pump for vertical wet installation, for pumping contaminated and sandy water. Cast iron hydraulic housing, impeller and engine housing. Pressure connection with vertical pressure output and Storz coupling. Self-cooling motor in single-phase design and detachable connection cable with earthed plug and operating capacitor. The seal is made on the medium and motor side with a mechanical seal. The unit can be used in sorrel without restrictions.

Product data

• Type of impeller construction: Open multi-channel impeller
• Free passage for the hydraulics: 40 mm
• Maximum operating pressure PN: 2 bar
• Max. immersion depth: 12.5 m
• Media temperature T: 3 °C
• Max. medium temperature Tmax: 40 °C

Engine data

• Mains connection: 1~230 V, 50 Hz
• Voltage tolerance: ±10%
• Capacity factor: 0.86
• Motor rated power P2: 1.3 kW
• Power consumption P1 max: 1.80 kW
• Rated current IN: 9.4 A
• Starting current I: 20 A
• Grant Type: Direct Online (DOL)
• Rated speed n: 2900 rpm
• Max. breaking frequency t: 15 1/h
• Insulation class: F
• Protection class: IP68
• Operating mode (submerged): S1
• Operating mode (not submerged): S1

Hydraulic data

• Maximum operating pressure PN: 2 bar
• Type of impeller construction: Open multi-channel impeller
• Free passage for the hydraulics: 40 mm
• Max. immersion depth: 12.5 m
• My. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 40 °C
• Ambient temperature min. Tmin: -15 °C
• Max. ambient temperature Tmax: 40 °C

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross-section: 4G1.5 mm²
• Mains plug: SMP 10M
• Type of connection cable: Detachable

Material

• Pump housing: Cast iron
• Impeller: Cast iron
• Shaft: Stainless steel
• Material seal on the pump side: QQPGG
• Material seal on the engine side: BVPGG
• Material seal: FKM
• Material engine: Cast iron

Installation dimensions

• Pipe connection on the pressure side: Storz C

Measure

• Length L: 198 mm
• Height H: 473 mm
• Width W: 297 mm