Wilo KS 9 ES, Drainage Pump
Watch this product and we will notify you once it is back in stock.
Wilo KS 9 ES, Drainage Pump
Description
Drainage pump in robust construction, equipped with level rocker. Primarily intended for mobile installation. Pumping of contaminated drainage water, e.g. construction pits, flooded areas, etc. Fully submersible waste water pump for vertical wet installation, for pumping contaminated and sandy water. Hydraulic housing and impeller in cast iron, engine housing in aluminium. Pressure connection with vertical pressure output and Storz coupling. Self-cooling motor in alternating current design and detachable connection cable with level switch, earthed plug and operating capacitor. The seal is made on the medium and motor side with a mechanical seal. The unit can be used in sorrel without restrictions.
Product data
- Type of impeller construction: Multi-channel impeller
- Free passage for the hydraulics: 5 mm
- Maximum operating pressure PN: 2 bar
- Max. immersion depth: 12.5 m
- medium temperature T: 3 °C
- Max. medium temperature Tmax: 40 °C
Engine data
- Mains connection: 1~230 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.85
- Motor rated power P2: 0.75 kW
- Power consumption P1 max: 1.10 kW
- Rated current IN: 5.7 A
- Starting current I: 16 A
- Grant Type: Direct Online (DOL)
- Rated speed n: 2900 rpm
- Max. breaking frequency t: 15 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S1
Hydraulic data
- Maximum operating pressure PN: 2 bar
- Type of impeller construction: Multi-channel impeller
- Free passage for the hydraulics: 5 mm
- Max. immersion depth: 12.5 m
- My. medium temperature Tmin: 3 °C
- Max. medium temperature Tmax: 40 °C
- Ambient temperature min. Tmin: -15 °C
- Max. ambient temperature Tmax: 40 °C
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross-section: 4G1.5 mm²
- Mains plug: SMP 6MA
- Type of connection cable: Detachable
Equipment/function
- Level switch: Yes
- Engine protection: None
Material
- Pump housing: Cast iron
- Impeller: Cast iron
- Shaft: Stainless steel
- Material seal on the pump side: QQPGG
- Material seal on the engine side: BVPGG
- Material seal: FKM
- Material engine: Aluminum
Installation dimensions
- Pipe connection on the pressure side: Storz C