​Wilo Padus MINI3, M04.12/M06-523/P, Drainage Pump

Description

Submersible pump for stationary and transportable wet installation in intermittent operation :Use: For pumping in houses of: Waste water without faeces: Waste water (with small amounts of sand and gravel): Construction: Drainage pump with free-flow impeller and vertical threaded connection. Plastic hydraulic housing and impeller. Surface-cooled 1~ motor with built-in operating capacitor and self-regulating thermal motor monitoring. Engine housing made of stainless steel. Oil-filled sealing chamber with double seal: on the motor side there is a shaft sealing ring and on the pump side there is a mechanical seal. Detachable connection cable with level switch and mounted plug (CEE 7/7).

Specifications

• Color: silver/black

Hydraulic Data

• Maximum operating pressure p: 1.8 bar
• Pressure connection: G 1½
• Free passage for the hydraulics: 10 mm
• Type of impeller construction: Semi-open multi-channel impeller
• Max. immersion depth: 7 m
• Call height max. Hmax: 12.4 m
• Flow max. Qmax: 19.5 m³/h
• Min. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 40 °C
• Ambient temperature min. Tmin: 3 °C
• Max. ambient temperature Tmax: 40 °C

Engine Data

• Mains connection: 1-230 V, 50 Hz
• Voltage tolerance: ±10%
• Motor rated power P2: 0.6 kW
• Power consumption P1 max: 0.93 W
• Rated current IN: 4.1 A
• Starting current I: 9.5 A
• Capacity factor: 0.99
• Rated speed n: 2900 1/min
• Max. breaking frequency t: 30 1/h
• Number of poles: 2
• Insulation class: F
• Protection class: IP68
• Operating mode (submerged): S1
• Operating mode (not submerged): S3-20%

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross section: 3G1 mm²
• Type of connection cable: detachable

Equipment/Function

• Mains plug: CEE7/7 (Schuko)
• Level rocker: none
• Cutting tool: none
• Motor guard: Bimetal
• Engine tightness monitoring: none
• Sealing chamber tightness monitoring: none
• Leakage chamber tightness monitoring: none

Material

• Pump housing: PP-GF30
• Impeller: PK-GF30
• Shaft: stainless steel
• Material seal on the pump side: Carbon, plastic impregnated
• Material motor: stainless steel

Installation Dimensions

• Pipe connection on the pressure side: G1½

Measure

• Length: 245mm
• Height: 386mm
• Width: 183mm