​Wilo Padus MINI3, V04.10/M06-523/A, Drainage Pump

Description

Submersible pump for stationary and transportable wet installation in intermittent operation. Use: For pumping in houses of: 

• Waste water without feces.
• Waste water (with small amounts of sand and gravel).

Drainage pump with free-flow impeller and vertical threaded connection. Plastic hydraulic housing and impeller. Surface-cooled 1~ motor with built-in operating capacitor and self-regulating thermal motor monitoring. Engine housing made of stainless steel. Oil-filled sealing chamber with double seal: on the motor side there is a shaft sealing ring and on the pump side there is a mechanical seal. Detachable connection cable with level switch and mounted plug (CEE 7/7).

Hydraulic Data

• Max operating pressure p: 1.5 bar
• Pressure connection: G 1½
• Free passage for the hydraulics: 30 mm
• Impeller design type: Free flow impeller
• Max. immersion depth: 7 m
• Call height max. Hmax: 9.4 m
• Flow max. Qmax: 18.5 m³/h
• Min. average temperature Tmin: 3 °C
• Max. average temperature Tmax: 40 °C
• Ambient temperature min. Tmin: 3 °C
• Max. ambient temperature Tmax: 40 °C

Engine Data

• Mains connection: 1~230 V, 50 Hz
• Voltage tolerance: ±10%
• Motor rated power P2: 0.6 kW
• Power consumption P1 max: 0.93 kW
• Rated current IN: 4.1 A
• Starting current I: 9.5 A
• Operating mode (submerged): S1
• Operating mode (not submerged) :S3-20%
• Nominal speed n: 2900 1/min
• Capacity factor: 0.99
• Number of posts: 2
• Max. breaking frequency t: 30 1/h
• Insulation class: F
• Protection class motor: IP68

Cable

• Length of connection cable: 10 m
• Cable type: H07RN-F
• Cable cross section: 3G1 mm²
• Type of connection cable: Detachable

Material

• Pump housing: PP-GF30
• Impeller: PK-GF30
• Shaft: Stainless steel
• Material seal on the pump side: Carbon, plastic impregnated
• Material seal: NBR
• Material motor: Stainless steel

Installation Dimensions

• Connection output: G 1½

Dimensions

• Length: 245mm
• Height: 407mm
• Width: 183mm