Wilo Padus Pro, M08L/T039-540/P, Drainage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Padus Pro, M08L/T039-540/P, Drainage Pump
Description
Submersible pump intended for drainage water. Supplied with 23 meter cable. Fully submersible wastewater pump for vertical wet installation, for pumping polluted and sandy water. Hydraulic housing in rubberized aluminum, impeller in Duplex chrome and motor housing in aluminum in a stainless steel cooling jacket tube. Pressure connection with vertical or horizontal pressure outlet and Storz coupling. Surface-cooled IE3 motor in three-phase design with thermal motor monitoring, motor protection and sealing chamber. Detachable connection cable with CEE plug. The sealing is performed with two mechanical seals independent of the direction of rotation. The unit can be used in sorrel without restrictions.
Product data
- Type of impeller construction: Open multi-channel impeller
- Free passage for the hydraulics: 10 mm
- Maximum operating pressure PN: 3 bar
- Max. immersion depth: 20 m
- Medium temperature T: 3 °C
- Max. medium temperature Tmax: 40 °C
Engine data
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.86
- Motor rated power P2: 3.9 kW
- Power consumption P1 max: 4.60 kW
- Rated current IN: 7.8 A
- Starting current I: 52 A
- Payment Type: Direct Online (DOL)
- Rated speed n: 2857 1/min
- Max. breaking frequency t: 20 1/h
- Insulation class: H
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S1
Cable
- Length of connection cable: 23 m
- Cable type: H07RN-F
- Cable cross-section: 4G1.5 mm²
- Mains plug: CEE 16A, 3P+N+PE, 6h
- Type of connection cable: Not detachable
Equipment/function
- Level rocker: None
- Engine guard: Bimetal
Material
- Pump housing: Aluminum
- Impeller: Stainless steel
- Shaft: Stainless steel
- Material seal on the pump side: QQPGG
- Material seal on the motor side: BXPFF
- Material seal: NBR
- Material engine: Aluminum
Installation dimensions
- Pipe connection on the pressure side: Storz B
Measure
- H: 859 mm
- H1: 155 mm
- A: 65 mm
- B: 260 mm