Wilo Padus UNI, M05A/T025-540/A, Drainage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Padus UNI, M05A/T025-540/A, Drainage Pump
Description
Drainage and waste water pump. Equipped with level rocker, CEE connector and 10 meter cable for stationary and transportable wet installation during intermittent operation.
For pumping in commercial areas in:
- Waste water without feces
- Waste water (with small amounts of sand and gravel)
- Wastewater, slightly acidic, with a pH value >4.5
The pumps meet the requirements according to SS-EN 12050-2. Drainage pump with open multi-channel impeller and vertical threaded connection. Hydraulic housing and impeller in copolymer. Surface cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double seal. Engine housing made of stainless steel. Detachable connection cable with CEE plug. Level switch and thermal motor monitoring are connected to the CEE connector.
Product Data
- Hydraulic type: Open multi-channel impeller
- Free passage for the hydraulics: 10 mm
- Maximum operating pressure PN: 3 bar
- Max. immersion depth: 7 m
- medium temperature T: 3 °C
- Max. medium temperature Tmax: 40 °C
Engine Data
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.84
- Motor rated power P2: 2.5 kW
- Power consumption P1 max: 3.20 kW
- Rated current IN: 5.5 A
- Starting current I: 31 A
- Payment Type: Direct Online (DOL)
- Rated speed n: 2848 1/min
- Max. breaking frequency t: 60 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min., S3-10%
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 6G1 mm²
- Type of connection cable: Detachable
Equipment/function
- Level switch: Yes
- Motor guard: Bimetal
Material
- Pump housing: PP-GF30
- Impeller: PP-GF30
- Shaft: Stainless steel
- Material seal on the pump side: QQPGG
- Material seal on the motor side: BXPFF
- Material seal: NBR
- Material motor: Stainless steel
Installation Dimensions
- Pipe connection on the pressure side: G 2
Measure
- Length L: 333 mm
- Height H: 523 mm
- Width W: 247 mm