Wilo Padus, UNI-M05B/T025-540/O, Drainage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Padus, UNI-M05B/T025-540/O, Drainage Pump
Description
Submersible pump for stationary and transportable wet installation in intermittent operation. For pumping in commercial areas i
- Waste water without faeces
- Waste water (with small amounts of sand and gravel)
- Waste water, slightly acidic, with a pH value >3.5
- Lake and seawater NaCl content (table salt): max. 30 g/l at 20 °C
- Bathing water, maximum chlorine content: 400 mg/l
Supply of waste water according to (DIN) SS-EN 12050.The pumps meet the requirements according to SS-EN 12050-2.
Drainage pump with open multi-channel impeller and vertical threaded connection. Hydraulic housing and impeller in copolymer. Surface-cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double seal. Engine housing made of stainless steel. Detachable connection cable with free cable end.
Hydraulic data
- Maximum operating pressure PN: 3 bar
- Hydraulic type: Open multi-channel impeller
- Free passage for the hydraulics: 10 mm
- Max. immersion depth: 7 m
- My. medium temperature Tmin: 3 °C
- Max. medium temperature Tmax: 40 °C
- Ambient temperature min. Tmin: 3 °C
- Max. ambient temperature Tmax: 40 °C
Engine data
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.84
- Motor rated power P2: 2.5 kW
- Power consumption P1 max: 3200 W
- Rated current IN: 5.5 A
- Starting current I: 31 A
- Grant Type: Direct Online (DOL)
- Rated speed n: 2848 1/min
- Max. breaking frequency t: 60 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min.
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 6G1 mm²
- Type of connection cable: Detachable
Equipment/function
- Motor guard: Bimetal
Material
- Pump housing: PP-GF30
- Impeller: PP-GF30
- Material seal on the pump side: QQPGG
- Material seal on the engine side: BXPFF
- Material seal: NBR
- Material motor: stainless steel
Installation dimensions
- Pipe connection on the pressure side: G 2
Measured
- Length L: 333 mm
- Height H: 523 mm
- Width W: 247 mm