Wilo Rexa FIT V05DA-122/E -P 1-Phase, Sewage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Rexa FIT V05DA-122/E -P 1-Phase, Sewage Pump
Description
Fully submersible sewage motor pump for stationary and transportable wet installation for pumping waste water and sewage with faeces (within the scope of EN 12050-1). Hydraulic housing and impeller in cast iron, engine housing in stainless steel. The sealing on the media and motor side is done by two mechanical seals that are independent of the direction of rotation. Surface-cooled motor in single-phase design with built-in operating capacitor, sealing chamber and self-regulating thermal motor monitoring. Detachable connection cable with grounded plug. Equipped with thermal contacts (WSK).
Hydraulic Data
- Maximum operating pressure: 0.6 bar
- Pressure connection: DN 50
- Free passage for the hydraulics: 50 mm
- Type of impeller construction: Free-flow impeller
- Max. immersion depth: 7 m
- Call height max. (Hmax): 5.7 m
- Flow max. (Qmax): 20.0 m³/h
- My. medium temperature (Tmin): 3 °C
- Max. medium temperature (Tmax): 40 °C
- Ambient temperature min. (Tmin): 3 °C
- Max. ambient temperature (Tmax): 40 °C
Engine Data
- Type: S 13.1-08/EAD0-2-M 1.1 kW
- Mains connection: 1~230 V, 50 Hz
- Voltage tolerance: ±10%
- Motor rated power P2: 1.1 kW
- Power consumption P1 max: 1.59 kW
- Rated current IN: 7.2 A
- Starting current I: 29 A
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min.
- Rated speed n: 2899 1/min
- Capacity factor: 0.97
- Number of poles: 2
- Max. breaking frequency t: 60 1/h
- Insulation class: F
- Protection class motor: IP68
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 3G1 mm²
- Type of connection cable: Detachable
Equipment/Function
- Mains plug: CEE7/7 (Schuko)
- Level rocker: None
- Cutting tools: None
- Type of explosion protection:-
- Motor guard: Bimetal
- Tightness monitoring of engine: None
- Leakage monitoring of sealing chamber: Optional
- Leakage Chamber Leakage Monitoring: None
Material
- Pump housing: Cast iron
- Impeller: Cast iron
- Shaft: Stainless steel
- Material seal on the pump side: Silicon carbide
- Material seal on the motor side: NBR (nitrile rubber)
- Material seal: NBR (nitrile rubber)
- Material motor: Stainless steel
Installation Dimensions
- Connection input: DN 50
- Connection output: DN 50