Wilo Rexa FIT V05DA-126/E -A 3-Phase, Sewage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Rexa FIT V05DA-126/E -A 3-Phase, Sewage Pump
Description
Fully submersible sewage motor pump for stationary and transportable wet installation for pumping waste water and sewage with faeces (within the scope of EN 12050-1). Hydraulic housing and impeller in cast iron, engine housing in stainless steel. The sealing on the media and motor side is done by two mechanical seals that are independent of the direction of rotation. Surface-cooled motor in three-phase design with sealing chamber and thermal motor monitoring. Detachable connection cable with CEE plug and level switch. Equipped with thermal contacts (WSK).
Hydraulic Data
- Maximum operating pressure (p): 1.4 bar
- Pressure connection: DN 50
- Free passage for the hydraulics: 50 mm
- Type of impeller construction: Free-flow impeller
- Maximum immersion depth: 7 m
- Maximum lifting height (Hmax): 12.7 m
- Maximum flow (Qmax): 40.0 m³/h
- Minimum media temperature (Tmin): 3 °C
- Maximum media temperature (Tmax): 40 °C
- Minimum ambient temperature (Tmin): 3 °C
- Maximum ambient temperature (Tmax): 40 °C
Engine Data
- Type: S 13.1-08/EAD1-2-T 1.5 kW
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Motor rated power (P2): 1.5 kW
- Power consumption (P1 max): 2.10 kW
- Rated current (IN): 3.6 A
- Starting current (I): 20.5 A
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min.
- Rated speed (n): 2850 1/min
- Capacity factor: 0.84
- Number of poles: 2
- Maximum breaking frequency (t): 60 1/h
- Insulation class: F
- Protection class motor: IP68
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 6G1 mm²
- Type of connection cable: Detachable
Equipment/Function
- Mains plug: CEE 16A, 3P+N+PE, 6h
- Level switch: Yes
- Cutting tools: None
- Motor guard: Bimetal
- Tightness monitoring of engine: None
- Leakage monitoring of sealing chamber: Optional
- Leakage Chamber Leakage Monitoring: None
Material
- Pump housing: Cast iron
- Impeller: Cast iron
- Shaft: Stainless steel
- Material seal on the pump side: Silicon carbide
- Material seal on the motor side: NBR
- Material seal: NBR
- Material motor: Stainless steel
Installation Dimensions
- Connection input: DN 50
- Connection output: DN 50