Wilo Rexa FIT V06DA-625/E-O, 3-Phase, Sewage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Rexa FIT V06DA-625/E-O, 3-Phase, Sewage Pump
Description
Fully submersible sewage motor pump for stationary and transportable wet installation for pumping waste water and sewage with faeces (within the scope of EN 12050-1). Hydraulic housing and impeller in cast iron, motor housing in stainless steel. The sealing on the media and motor side is done by two mechanical seals that are independent of the direction of rotation. Surface-cooled motor in three-phase design with sealing chamber and thermal motor monitoring. Detachable connection cable with free cable end.
Hydraulic Data
- Maximum operating pressure p: 0.9 bar
- Pressure connection: DN 65/80
- Free passage for the hydraulics: 65mm
- Type of impeller construction: Free-flow impeller
- Max. immersion depth: 7m
- Call height max. Hmax: 8.4 m
- Flow max. Qmax: 60.0 m³/h
- My. medium temperature Tmin: 3 °C
- Max. medium temperature Tmax: 40 °C
- Ambient temperature min. Tmin: 3 °C
- Max. ambient temperature Tmax: 40 °C
Engine Data
- Motor construction: Submersible motor - surface cooled
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.77
- Motor rated power P2: 1.5 kW
- Power consumption P1 max: 1.97 kW
- Rated current IN: 3.7 A
- Starting current I: 24.5 A
- Payment Type: Direct Online (DOL)
- Number of poles: 4
- Rated speed n: 1413 1/min
- Max. breaking frequency t: 60 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min, S3-10%
Cable
- Length of connection cable: 10m
- Cable type: H07RN-F
- Cable cross section: 6G1mm²
- Mains connection: none
- Type of connection cable: Detachable
Equipment/Function
- Level rocker: none
- Cutting tool: none
- Motor guard: Bi metal
- Engine tightness monitoring: none
- Leakage monitoring of sealing chamber: Optional
- Leakage chamber tightness monitoring: none
Material
- Pump housing: Cast iron
- Impeller: Cast iron
- Shaft: stainless steel
- Material seal on the pump side: QQPGG
- Material seal on the motor side: BXPFF
- Material seal: NBR
- Material motor: stainless steel
Installation Dimensions
- Pipe connection on the suction side: DN 65
- Pipe connection on the pressure side: DN 65/80