Wilo Rexa, UNI-V05A/T004-540/O, Sewage Pump
Watch this product and we will notify you once it is back in stock.
Wilo Rexa, UNI-V05A/T004-540/O, Sewage Pump
Description
Submersible pump for stationary and transportable wet installation in intermittent operation. Drainage pump with free-flow impeller and horizontal flange connection. Flange connection as combi flange with integrated attachment and flat seal. Hydraulic housing and impeller in copolymer. Surface cooled 3~ motor with thermal motor monitoring. Oil-filled sealing chamber with double seal. Engine housing made of stainless steel. Detachable connection cable with free cable end.
For pumping in commercial areas in:
- Sewage with faeces
- Waste water (with small amounts of sand and gravel)
- Wastewater, slightly acidic, with a pH value >4.5
Product Data
- Hydraulic type: Free-flow wheel
- Free passage for the hydraulics: 44 mm
- Maximum operating pressure PN: 1 bar
- Max. immersion depth: 7 m
- Media temperature T: 3 °C
Engine Data
- Motor construction: Submersible motor - surface cooled
- Mains connection: 3~400 V, 50 Hz
- Voltage tolerance: ±10%
- Capacity factor: 0.80
- Motor rated power P2: 0.37 kW
- Power consumption P1 max: 0.58 kW
- Rated current IN: 1.1 A
- Starting current I: 4.8 A
- Number of poles: 2
- Rated speed n: 2810 1/min
- Max. breaking frequency t: 60 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S2-15 min.
- Operating mode (not submerged): S3-10%
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 6G1 mm²
- Mains connection: none
- Type of connection cable: Detachable
Equipment/Function
- Level rocker: none
- Cutting tool: none
- Motor guard: Bimetal
- Engine tightness monitoring: none
- Leakage monitoring of sealing chamber: Optional
- Leakage chamber tightness monitoring: none
Material
- Pump housing: PP-GF30
- Impeller: PP-GF30
- Shaft: stainless steel
- Material seal on the pump side: QQPGG
- Material seal on the motor side: NBR
- Material seal: NBR
- Material motor: stainless steel
Installation Dimensions
- Pipe connection on the pressure side: DN 50
Measure
- Length: 304 mm
- Height: 505 mm
- Width: 271 mm