Wilo Stratos GIGA2.0-I 50/1-17/1,1, Circulation Pump
Dry highly efficient circulation pump in single version, delivered complete with differential pressure transmitter.
Watch this product and we will notify you once it is back in stock.
Wilo Stratos GIGA2.0-I 50/1-17/1,1, Circulation Pump
Dry highly efficient circulation pump in single version, delivered complete with differential pressure transmitter.
Description
Dry highly efficient circulation pump in single version, delivered complete with differential pressure transmitter. Equipped with permanent magnet motor and built-in frequency converter. Together with CIF module (accessory) prepared for connection to building automation via Ethernet, CAN, LON, BACnet or Modbus interfaces.
Functions
- Selection of area of use in the settings assistant
- Heat quantity registration
- Cooling quantity registration
- Adjustable flow limitation through Q-Limit function (Qmin. and Qmax.)
- Operating mode of twin pumps: Main/standby operation, efficiency-optimized parallel operation for dp-c and dp-v
- Automatic pump shutdown when zero flow is detected (No-Flow Stop)
- Switching between heating and cooling operation (automatic, external or manual)
- Save and reset the set pump settings (3 reset points)
- Indication of the current operating point in hydraulic total characteristic field
- Correction of viscous media by adjusting the viscosity and density
- Error/warning message in plain text including action recommendation
- Integrated full engine protection
Scope Of Delivery
- Pump
- Wilo-Smart Connect module BT
- Cable glands with sealing inserts
- Assembly instructions (brief) and declaration of conformity
Hydraulic Data
- Minimum Effectiveness Index (MEI) : ≥0.7
- Maximum operating pressure PN : 16 bar
- My. medium temperature Tmin : -20 °C
- Max. medium temperature Tmax : 140 °C
- Ambient temperature min. Tmin : 0 °C
- Max. ambient temperature Tmax : 50 °C
Driving
- Mains connection : 3~400 V, 50/60 Hz
- Motor efficiency class : IE5
- Power consumption P1 max: 1200 W
- Motor rated power P2 : 1.1 kW
- Rated current IN : 1.9 A
- Disturbance emission : EN 61800-3
- Noise stability : EN 61800-3
- Insulation class: F
- Motor protection class: IP55
- Motor protection: PTC integrated
Material
- Pump housing: Cast iron
- Impeller : PPS-GF40
- Shaft: stainless steel
- Shaft seal : AQ1EGG
- Lanterna : 5.1301/EN-GJL-250, KTL coated
Permitted liquids (other liquids on request)
- Heat conduction water (according to VDI 2035) : Yes
- Heat carrier oil: Special design at extra cost
- Cooling and cold water : Yes
- Water-glycol mixture (at 20 – 40 vol.-% glycol and medium temperature ≤ 40 °C) : Yes
Installation Dimensions
- Construction length L0: 280 mm
- Pipe connection on the suction side: DN 50
- Pipe connection on the pressure side: DN 50