Wilo Stratos PICO, 30/0.5-4 -180, Circulation Pump
Watch this product and we will notify you once it is back in stock.
Wilo Stratos PICO, 30/0.5-4 -180, Circulation Pump
Description
Wet highly efficient circulation pump in a single version intended for circulation of heating water. Equipped with permanent magnet motor and built-in frequency converter. High-efficiency pump WILO-Stratos PICO, electronically regulated. Circulation pump with wet motor with screw connection, blocking-proof synchronous motor according to ECM technology (up to 90% energy saving compared to an unregulated pump) and built-in electronic capacity regulation for stepless differential pressure regulation. For all heating and climate applications (-10 °C to +110 °C). Control mode can be selected depending on the use of radiators/underfloor heating.
Functions
- Automatic lowering operation
- Display of fault and warning messages with description and error code in plain text
- Ventilation routine for automatic venting of the rotor room
- Manual restart function for further unblocking of the pump if necessary
- Button lock
- Function to reset the power meter or settings to factory settings
- Dry run identification
- Automatic unblocking function and built-in motor protection
- Support for hydraulic leveling via the Wilo-Assistant app
Hydraulic data
- Maximum operating pressure PN: 10 bar
- Call height H max: 4.2 m
- Flow Q max: 2.9 m³/h
- Minimum inlet height at 50 °C: 0.5 m
- Minimum inlet height at 95 °C: 3 m
- Minimum inlet height at 110 °C: 10 m
- My. medium temperature Tmin: -10 °C
- Max. medium temperature Tmax: 110 °C
- Max. medium temperature at max. ambient temperature +25 °C Tmax : 110 °C
- Max. medium temperature at max. ambient temperature +40 °C Tmax : 95 °C
- Ambient temperature min. Tmin: -10 °C
- Max. ambient temperature Tmax: 40 °C
Engine data
- Energy Efficiency Index (EEI): ≤0.18
- Mains connection: 1~230 V ±10%, 50/60 Hz
- Rated power P2: 15 W
- RPM min. nmin: 700 1/min
- RPM max. nmax: 3400 rpm
- Input power (min) P1 min: 3 W
- Power consumption P1 max: 20 W
- Interference emission: EN 61000-6-3
- Interference stability: EN 61000-6-2
- Electromagnetic tolerance: EN 61800-3
- Cable gland: 1 x PG11
- Insulation class: F
- Protection class: IPX4D
Material
- Pump housing: Cast iron
- Impeller: PP-GF40
- Shaft: Stainless steel
- Material layer: Carbon, metal impregnated
Installation measure
- Pipe connection on the pressure side: G 2
- Pipe connection on the suction side: G 2
- Construction length l0: 180 mm
Measured
- Length L: 161 mm
- Height H: 115 mm
- Width W: 180 mm