Wilo TWU 4-0405-C 1-Phase, Borehole Pump

Description

Fully submersible, multi-stage borehole pump with radial or semi-axial impellers in articulated construction for vertical or horizontal installation, with integrated non-return valve. Corrosion-free single-phase or three-phase motor for direct start with water-glycol filling. Hermetically sealed with varnish-insulated winding, resin-impregnated and self-lubricating layer. The motor is cooled by the medium. The unit must always be used submerged. For horizontal installation, cooling jackets must be used : For pumping water out of boreholes with a maximum immersion depth of 200 m and a maximum sand amount of 50 g/m³.

Hydraulic Data

• Minimum Effectiveness Index (MEI): ≥0.7
• Maximum operating pressure PN: 4 bar
• Max. sand content: 50 g/m³
• Max. immersion depth: 200 m
• Flow max. Qmax 6.0 m³/h
• Optimal flow Qopt: 3.7 m³/h
• Call height max. Hmax: 33.0 m
• Optimum call height Hopt: 20.7 m
• Min. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 30 °C
• Number of pump stages: 5

Engine Data

• Mains connection: 1-230 V, 50 Hz
• Motor rated power P2: 0.37 kW
• Rated speed n: 2855 1/min
• Rated current IN: 3.35 A
• Starting current I: 10.6 A
• Capacity factor: 0.87
• Max. breaking frequency t: 20 1/h
• Motor diameter DM: 98 mm

Cable

• Length of connection cable: 1.8 m
• Cable cross-section: 4G1.5 mm²

Material

• Pump housing: stainless steel
• Impeller: PPE
• Shaft: stainless steel
• Material motor: stainless steel

Installation Dimensions

• Pipe connection on the pressure side Rp 1¼

Measure

• Length: 507mm
• Height/ Width: Ø 98mm