Wilo TWU, 4.08-07-DM-C-QC, Borehole Pump
Watch this product and we will notify you once it is back in stock.
Wilo TWU, 4.08-07-DM-C-QC, Borehole Pump
Description
Fully submersible, multi-stage submersible pump with radial or semi-axial impellers in sections for vertical or horizontal installation, with built-in non-return valve. Corrosion-free single-phase or three-phase AC motor for direct start with water-glycol filling. Hermetically sealed with enamel insulation of windings, resin impregnated and self-lubricating bearings. The motor is cooled by the pumped water. Therefore, the device must always be used submerged. Horizontal installation must be carried out in combination with a cooling jacket.
For pumping water from drilled holes with a maximum immersion depth of 200 m and a maximum sand content of 50 g/m³. The QC version is equipped with a quick-connect cable for easy and quick replacement of the power cable.
Hydraulic Data
- Minimum Effectiveness Index (MEI): ≥0.4
- Maximum operating pressure PN: 5 bar
- Maximum sand content: 50 g/m³
- Maximum immersion depth: 200 m
- Maximum flow Qmax: 13.0 m³/h
- Optimal flow Qopt: 7.2 m³/h
- Maximum delivery height Hmax: 43.4 m
- Optimum delivery height Hopt: 32.97 m
- Lowest liquid temperature Tmin: 3 °C
- Highest liquid temperature Tmax: 30 °C
- Number of steps: 7
Engine Data
- Mains connection: 3~400 V, 50 Hz
- Rated power P2: 1.1 kW
- Rated speed n: 2840 1/min
- Insulation class (IEC): B
- Rated current IN: 2.95 A
- Starting current I: 14.3 A
- Power factor cos φ100: 0.76
- Maximum breaking frequency t: 20 1/h
- Motor diameter DM: 97 mm
Cable
- Connection cable length L: 1.75 m
- Cable cross-section: 4G1.5 mm²
Material
- Pump housing: Stainless steel
- Impeller: PPE
- Shaft: Stainless steel
- Engine housing: Stainless steel
Installation Dimensions
- Pipe connection on the outlet side DNd: Rp 2
Measure
- Length: 690 mm
- Height: 98 mm
- Width: 98 mm