Wilo VeroLine, IPL, 40/80-0.09/4, Circulation Pump

Description

Single-stage circulation pump with dry motor in compact inline construction with direct fixed flanged three-phase motor and undivided shaft or with lantern and standard motor (version N) with fixed coupling. The IPL series is suitable for pipe installation or for placement on a base plate. Consoles are available as accessories. With pleated mechanical shaft seal with forced circulation that is independent of the direction of rotation and cavitation-reducing plastic impeller. Flange with pressure measurement connections R 1/8. The pump housing and the lantern have cathodic coating. The motor junction box can be made of metal or plastic. If a metal junction box is required, the corresponding special version must be ordered.

Hydraulic data

• Max. operating pressure p: 10 bar
• Maximum operating pressure PN; 10 bars
• My. medium temperature Tmin: -20 °C
• Max. medium temperature Tmax :120 °C
• Max. ambient temperature Tmax: 40 °C
• Flow Q max: 8.6 m³/h
• Flow op:t 5.3 m³/h
• Call height H max: 1.9 m
• Call height opt: 1.3 m
• Height: 1.9 m

Engine data

• Mains connection: 3~400 V, 50 Hz
• Voltage tolerance: ±10%
• Motor efficiency class: IE2
• Motor rated power P2: 0.09 kW
• Rated current IN: 0.26 A
• Rated speed n: 1380 1/min
• Capacity factor 0.73
• Motor efficiency ηm 50% ηM 50%: 61.5%
• Engine efficiency ηm 75% ηM 75%: 66.8%
• Engine efficiency ηm 100% ηM 100%: 67.9%
• Insulation class: F
• Protection class motor: IP55

Material

• Pump housing: Cast iron
• Impeller: PPE/PS-GF30
• Shaft: stainless steel
• Mechanical seal: AQ1EGG
• Lantern: Cast iron

Installation measure

• Pipe connection on the suction side: DN 40
• Pipe connection on the pressure side: DN 40
• Construction length l0: 250 mm

Measure

• Length L: 336.5 mm
• Height H: 250 mm
• Width W: 146 mm