-
Non-Magnetic Socket Bit 45L 8mm, HiKOKI 66750555
Socket made of high-quality chrome vanadium steel for use on stainless steel screws with hex heads.
004977385
51 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Pluggset Plugg & Borr Diameter 8MM
Träpluggset. Sats med räfflade träpluggar, längd 35 mm, borr med borrstopp och markeringsspetsar för exakt hopfogning.
004263119
125 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Profile Cutter With Steering 25.4mm 2 Blades, HiKOKI 66754096
Milling steel with carbide cutting and an 8 mm shank, equipped with a guide bearing for easy guidance against the material and optimal results.
004977456
600 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Profile Cutter With Steering 34.9mm 2 Blades, HiKOKI 66754097
Milling steel with carbide cutting and an 8 mm shank, equipped with a guide bearing for easy guidance against the material and optimal results.
004977457
770 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Profile Cutter With Steering 34.9mm 2 Steps, HiKOKI 66754114
Milling steel with carbide cutting and an 8 mm shank, equipped with a guide bearing for easy guidance against the material and optimal results.
004977458
928 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Profile Cutter Without Steering 12.7mm, HiKOKI 66754090
Milling steel with carbide cutting and an 8 mm shank, designed for profile milling with a dimension of 12.7 x 9.5 mm.
004977455
600 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Quarter Round Cutter With Steering 22.2mm, HiKOKI 66754091
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy guidance against the material and optimal results.
004977444
536 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Quarter Round Cutter With Steering 25.4mm, HiKOKI 66754092
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy guidance against the material and optimal results.
004977445
582 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Quarter Round Cutter With Steering 28.6mm, HiKOKI 66754093
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy guidance against the material and optimal results.
004977446
599 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Quarter Round Cutter With Steering 31.8mm, HiKOKI 66754094
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy guidance against the material and optimal results.
004977447
697 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Quarter Round Cutter With Steering 38.1mm, HiKOKI 66754095
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy guidance against the material and optimal results.
004977448
761 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Rebate Cutter With Steering 31.7mm, HiKOKI 66754098
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy material guidance and optimal results.
004977459
561 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Rebate Cutter With Steering 35mm, HiKOKI 66754099
Milling steel with carbide cutting and an 8 mm shank, equipped with guide bearings for easy material guidance and optimal results.
004977460
595 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 15.9mm, HiKOKI 66754101
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977466
570 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 19.1mm, HiKOKI 66754102
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977467
570 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 22.2mm, HiKOKI 66754103
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977468
570 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 25.4mm, HiKOKI 66754104
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977469
591 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 28.6mm, HiKOKI 66754105
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977470
599 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 31.8mm, HiKOKI 66754106
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977471
659 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 38.1mm, HiKOKI 66754107
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977472
693 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Roundover Cutter With Steering 44.5mm, HiKOKI 66754108
Milling cutter with carbide insert and an 8 mm shaft, equipped with a guide bearing for easy guidance against the material and optimal results.
004977473
913 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
SKRUVUTDRAGARBITS SOS WOLFCRAFT 2ST
Skruvutdragare SOS WolfcraftEtt bits för att kunna ta ut skruvar med skadat huvud. Storlek för skruvar med huvud: PH 1, PZ 1, TX 10 mm. Storlek 2: PH 2, PZ 2, TX 15-20.
006137632
171 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
SKÄR FÖR DOSFRÄS T-65
Tillbehör reservskär till dosfräs T-65, för håltagning till apparatdosa 68mm.
001353574
140 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
SKÄR FÖR DOSFRÄS T-70
Tillbehör reservskär till dosfräs T-70, för håltagning till apparatdosa 74mm.
001353575
165 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
SKÄR FÖR DOSFRÄS T-75
Tillbehör reservskär till dosfräs T-75, för håltagning 78mm.
001353576
140 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
SKÄR FÖR DOSFRÄS T-80
Tillbehör reservskär till dosfräs T-80, för håltagning till apparatdosa 84mm.
001353577
140 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
SPETSMEJSEL 400MM SDS-MAX Hikoki
Spetsmejsel med SDS-max skaft för snabb och enkel mejsling i betong.Härdad och ytbehandlad för mindre slitage och ökad livslängd.Passar alla verktyg med SDS-max verktygsfäste.
003280117
175 kr / pc.- Stock status
- Lev. normalt inom ca 2 till 5 vardagar
-
Self-Feed Drill 18mm, HiKOKI 60305012
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
006045083
162 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 22mm, HiKOKI 60305013
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
006045084
155 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 25mm, HiKOKI 60305001
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894117
193 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 29mm, HiKOKI 60305002
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894118
161 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 32mm, HiKOKI 60305003
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894119
212 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 35mm, HiKOKI 60305004
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894120
232 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 38mm, HiKOKI 60305005
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894121
264 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 44mm, HiKOKI 60305006
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894122
300 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 51mm, HiKOKI 60305007
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894123
340 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 54mm, HiKOKI 60305008
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894124
364 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 57mm, HiKOKI 60305009
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894125
396 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 65mm, HiKOKI 60305010
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894126
432 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 76mm, HiKOKI 60305011
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
005894127
508 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Self-Feed Drill 86mm, HiKOKI 60305014
Supplied with an extra drill tip and key for fast and efficient drilling in both soft and hard wood
006120254
588 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 10mm with 2 Blades 19/51mm, HiKOKI 66754059
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977424
351 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 10mm with 2 Blades 32/64mm, HiKOKI 66754060
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977425
441 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 10mm with 2 Blades 32/80mm, HiKOKI 66754061
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977426
580 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 12mm with 2 Blades 19/51mm, HiKOKI 66754062
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977427
388 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 12mm with 2 Blades 32/63mm, HiKOKI 66754063
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977428
456 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 12mm with 2 Blades 32/90mm, HiKOKI 66754064
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977429
592 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 14mm with 2 Blades 19/51mm, HiKOKI 66754065
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977430
408 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 15mm with 2 Blades 19/51mm, HiKOKI 66754067
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977432
436 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
-
Slot Cutter 16mm with 2 Blades 25/57mm, HiKOKI 66754068
This is a milling cutter with a carbide tip and a shaft, specially designed for milling decorative details in interior carpentry
004977433
448 kr / pc.- Stock status
- Lev. normalt inom ca 3 till 7 vardagar
