Wilo TWI, 4-0223-C VK-3/80, Pump Package Borehole
Watch this product and we will notify you once it is back in stock.
Wilo TWI, 4-0223-C VK-3/80, Pump Package Borehole
Description
Submersible pump for increasing and transporting water from a borehole. Integrated check valve. Supplied with installed cable and wire. Incl. capacity box for single phase. Approved for drinking water, RISE type approval SC0323-18.
Fully submersible, multi-stage pump for pumping industrial and potable water with radial or semi-axial impellers in sectional construction for vertical or horizontal installation, with integrated non-return valve. Corrosion-free single-phase or three-phase motor for direct start with water-glycol filling. Hermetically sealed with enamel insulation of windings, resin impregnated and self-lubricating bearings. The motor is cooled by the pumped fluid. Therefore, the unit must always be submerged for operation. The limited values for maximum fluid temperature and minimum flow rate must be observed. Vertical installation is possible with or without a cooling jacket. For horizontal installation, a cooling jacket must always be included.
Scope Of Delivery
- Submersible pump with connection cable and approval for drinking water, RISE type approval SC0323-18| 2019-03-07.
- Single-phase version including circuit breaker with capacitor, thermal motor protection and On/Off switch.
- Installation and operating instructions
Hydraulic Data
- Minimum Effectiveness Index (MEI): ≥0.7
- Maximum operating pressure (PN): 40 bar
- Max. sand content: 50 g/m³
- Max. immersion depth: 350 m
- Flow max. (Qmax): 2.9 m³/h
- Optimal flow (Qopt): 1.9 m³/h
- Call height max. (Hmax): 135.8 m
- Optimum call height (Hopt): 94.79 m
- My. medium temperature (Tmin): 3 °C
- Max. medium temperature (Tmax): 30 °C
- Number of pump stages: 23
Engine Data
- Mains connection: 3~400 V, 50 Hz
- Motor rated power P2: 1.1 kW
- Rated speed n: 2850 1/min
- Rated current IN: 2.8 A
- Starting current I: 16 A
- Capacity factor: 0.78
- Max. breaking frequency t: 20 1/h
- Motor diameter DM: 95 mm
Cable
- Cable length: 80 m
- Cable cross section: 3x1.5+1G1.5 mm²
Material
- Pump housing: stainless steel
- Impeller: stainless steel
- Shaft: stainless steel
- Material motor: stainless steel
Installation Dimensions
- Pipe connection on the pressure side: Rp 1¼
Measure
- Length: 972 mm
- Height: 98 mm
- Width: 95 mm