Wilo TWI, 4-0228-C VK-3/120, Pump Package Borehole
Watch this product and we will notify you once it is back in stock.
Wilo TWI, 4-0228-C VK-3/120, Pump Package Borehole
Description
Submersible pump for increasing and transporting water from a borehole. Integrated check valve. Supplied with installed cable and wire. Includes capacitor box for single phase. Approved for drinking water, RISE Type Approval SC0323-18.
Fully submersible, multistage pump for pumping industrial and potable water with radial or semi-axial impellers in sectional design for vertical or horizontal installation, with integrated non-return valve. Corrosion-free single-phase or three-phase motor for direct start with water-glycol filling. Hermetically molded with enamel insulation of windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped liquid. The unit must therefore always be submerged for operation. The limits for maximum liquid temperature and minimum flow must be observed. Vertical installation is possible with or without a cooling jacket. For horizontal installation, a cooling jacket must always be present.
Scope Of Delivery
- Submersible pump with connection cable and drinking water classification, RISE Type approval SC0323-18| 2019-03-07
- Single-phase version including junction box with capacitor, thermal motor protection and On/Off button
- Installation and operating instructions
Hydraulic Data
- Minimum Effectiveness Index (MEI): ≥0.7
- Maximum operating pressure PN: 40 bar
- Max. sand content: 50 g/m³
- Max. immersion depth: 350 m
- Flow max. Qmax: 2.9 m³/h
- Optimal flow Qopt: 1.9 m³/h
- Call height max. Hmax: 166.1 m
- Optimum call height Hopt: 116.2 m
- My. medium temperature Tmin: 3 °C
- Max. medium temperature Tmax: 30 °C
- Number of pump stages: 28
Engine Data
- Mains connection: 3~400 V, 50 Hz
- Motor rated power P2: 1.5 kW
- Rated speed n: 2843 1/min
- Rated current IN: 3.85 A
- Starting current I: 21 A
- Capacity factor: 0.79
- Max. breaking frequency t: 20 1/h
- Motor diameter DM: 95 mm
Cable
- Cable length: 120 m
- Cable cross section: 3x1.5+1G1.5 mm²
Material
- Pump housing: stainless steel
- Impeller: stainless steel
- Shaft: stainless steel
- Material motor: stainless steel
Installation Dimensions
- Pipe connection on the pressure side: Rp 1¼
Measure
- Length: 1109 mm
- Height: 98 mm
- Width: 95 mm