Wilo TWI, 4-0228-C VK-3/100, Pump Package Borehole

Description

Submersible pump to increase and transport water from a borehole. Integrated check valve. Supplied with installed cable and wire. Incl. Condenser box for single phase. Approved for drinking water, RISE Type Approval SC0323-18.

Fully submersible, multistage pump for pumping industrial and potable water with radial or semi-axial impellers in sectional design for vertical or horizontal installation, with integrated non-return valve. Corrosion-free single-phase or three-phase motor for direct start with water-glycol filling. Hermetically molded with enamel insulation of windings, resin-impregnated and self-lubricating bearings. The motor is cooled by the pumped liquid. Therefore, the unit must always be submerged for operation. The limit values for maximum fluid temperature and minimum flow rate must be observed. Vertical installation is possible with or without a cooling jacket. In case of horizontal installation, a cooling jacket must always be provided.

Scope Of Delivery

• Submersible pump with connection cable and drinking water classification, RISE Type approval SC0323-18| 2019-03-07
• Single-phase version including gearbox with capacitor, thermal motor protection and On/Off button
• Installation and operating instructions

Hydraulic Data

• Minimum Effectiveness Index (MEI): ≥0.7
• Maximum operating pressure PN: 40 bar
• Max. sand content: 50 g/m³
• Max. immersion depth: 350 m
• Flow max. Qmax: 2.9 m³/h
• Optimal flow Qopt: 1.9 m³/h
• Call height max. Hmax: 166.1 m
• Optimum call height Hopt: 116.2 m
• My. medium temperature Tmin: 3 °C
• Max. medium temperature Tmax: 30 °C
• Number of pump stages: 28

Engine Data

• Mains connection: 3~400 V, 50 Hz
• Motor rated power P2: 1.5 kW
• Rated speed n: 2843 1/min
• Rated current IN: 3.85 A
• Starting current I: 21 A
• Capacity factor: 0.79
• Max. breaking frequency t: 20 1/h
• Motor diameter DM: 95 mm

Cable

• Cable length: 100 m
• Cable cross section: 3x1.5+1G1.5 mm²

Material

• Pump housing: stainless steel
• Impeller: stainless steel
• Shaft: stainless steel
• Material motor: stainless steel

Installation Dimensions

• Pipe connection on the pressure side: Rp 1¼

Measure

• Length: 947 mm
• Height: 98 mm
• Width: 95 mm